What type of pallets can this elevator handle?

This type of pallet elevator is typically designed to accommodate standard industrial pallets, such as 1200 x 800 mm Euro pallets, allowing for loading with a hand pallet truck.

Is a pit required for installation?

Many single-pillar pallet elevators are designed for surface mounting, meaning they can be bolted directly to the factory floor without the need for a costly pit.

What are the typical safety features?

Common safety features include a safety latch system to prevent uncontrolled descent, upper and lower limit switches, and emergency stop buttons at both operating levels.

What maintenance is typically required?

Routine maintenance usually involves checking chain tension, lubricating moving parts, inspecting electrical connections, and verifying the functionality of safety devices. Specific schedules will be in the manufacturer's manual.

Can this equipment be used in washdown environments?

Given its typical Grade 304 stainless steel construction and IP65 rated control panel, units of this type are generally suitable for use in environments requiring regular washdowns.

How is the unit powered?

Pallet elevators commonly operate on a standard three-phase industrial power supply, though specific voltage requirements should be confirmed with the seller.

Pallet Elevator - Lifting & Tipping, Foto 1

Pallet Elevator - Lifting & Tipping, Foto 2

Pallet Elevator - Lifting & Tipping, Foto 3

Pallet Elevator - Lifting & Tipping, Foto 4

Pallet Elevator - Lifting & Tipping, Foto 5

Pallet Elevator - Lifting & Tipping, Foto 6

Verfügbar

Verifizierter Verkäufer

Pallet Elevator

Name: Pallet Elevator
SKU: PLM/250/3700/B
Availability: InStock

Preis: Preis auf Anfrage beim Verkäufer

PLM/250/3700/B Single Pillar Pallet Elevator

This Pallet Elevator was a single column lift with a Safe Working Load of 250 Kgs and a lift height of 3700mm to the top of the pallet. The lifting platform was big enough to allow a pallet (1200 x 800mm) to be loaded using a hand pallet truck and included a ramp at the ground floor. At the upper level the ingredients were unloaded over a handrail by hand. The Pallet Elevator was manufactured from Grade 304 stainless steel and was designed to be bolted to the floor without the need for a pit. The lifting is accomplished via a motor gearbox mounted at the top of the main column and a ¾” Duplex chain. This Pallet Elevator was fitted with a safety latch which engages automatically in the extremely unlikely event of a lift chain failure.

Pallet Elevator Electrical Control

The pallet Elevator was fitted with an IP65 Stainless Steel Control Panel mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The main control panel at the bottom of the Pallet Elevator incorporates the following controls; Up, Down & Emergency Stop. The push button station at the upper level incorporates the following controls; Up, Down & Emergency Stop.

Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site. The Pallet Elevator operation is on a ‘hold to run’ dual push button principle so that a pressing the ‘Run’ button and the respective ‘Up’ or ‘Down’ push buttons will raise or lower at both the main control panel and the push button station.

The control was configured such that from the ground level, the Pallet Elevator can be sent to an intermediate limit switch at a height of 2000mm and once it reaches this limit switch control will transfer to the upper push button station. The operator can now control the Pallet Elevator from the upper push button station to allow all product to be unloaded. After unloading, the operator can send the Pallet Elevator back to the intermediate limit switch where control will transfer to the main control panel for the rest of the travel to full down. The operator at the bottom will not be able to drive the Pallet Elevator all the way up and the operator at the top will not be able to drive the Pallet Elevator all the way down.

Blaenau Gwent County Borough, United Kingdom

5.743 km entfernt

Description

Single Pillar Pallet Elevator

Model No.

PLM/250/3700/B

Capacity

250 Kgs

Overall Height

5395mm

Machine Handing

Left Hand

Maximum Headroom

6000mm

Container Description

Pallet (1200 x 800mm)

Base Arrangement

Bolted To The Floor

Control Circuit

24Vac

Electrical Rating

IP65

Limit Switches

Telemecanique

Motor Detail

0.75kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE

Gearbox Detail

SEW

Output R.P.M

28 R.P.M.

Ratio

50:1

Tensile Strength

6000 Kgs, 3000 Kgs

Lift Speed

6.4 Meters/Minute

Tension Chain

¾” Simplex

Platform Size

1250 x 850mm

Lift Height

3700mm

Lift Chain

¾" Duplex

Bestandsnummer

PLM/250/3700/B

Machinery Masters View

Typische Informationen zu dieser Maschinenkategorie. Bitte bestätigen Sie die Einzelheiten immer beim Verkäufer.

Elevating palletised ingredients or finished products between different floor levels in food processing facilities.
Transferring goods from ground level to mezzanines or elevated platforms for further processing or storage.
Loading ingredients into hoppers or mixers positioned at height.
Assisting with ergonomic material handling to reduce manual lifting in production areas.

Typical Safe Working Load (SWL): For this class of equipment, a SWL of 250 kg is commonly found, suitable for standard palletised loads.
Maximum Lift Height: Units of this type typically offer lift heights around 3.7 meters, accommodating common industrial floor-to-floor heights.
Pallet Compatibility: Designed to accommodate standard Euro pallets (1200 x 800 mm) for ease of loading with hand pallet trucks.
Construction Material: Typically manufactured from Grade 304 stainless steel, ensuring suitability for hygienic food processing environments.
Drive Mechanism: Commonly features a motor gearbox and duplex chain system for reliable vertical movement.
Installation: Units are generally designed for floor bolting, eliminating the need for a costly pit installation.
Electrical Control: Typically includes an IP65 rated stainless steel control panel with Up, Down, and Emergency Stop functions at both ground and upper levels.
Safety Features: Often equipped with safety latches to prevent platform descent in the event of chain failure, and adjustable limit switches for safe operation.

This type of pallet elevator is typically designed to accommodate standard industrial pallets, such as 1200 x 800 mm Euro pallets, allowing for loading with a hand pallet truck.

Lifting and tipping equipment for food handling is valued for durability and reliability in demanding environments. Buyers typically prioritize robust construction, stainless steel components where applicable, and compliance with food safety standards. When purchasing used models, inspectors should assess mechanical wear, hydraulic system condition, and operational smoothness. Common strengths include longevity when properly maintained, efficient load handling, and adaptability to various food processing workflows. Equipment reputation generally remains strong provided previous maintenance records are documented and critical seals show minimal degradation.

Allgemeiner Überblick für diesen Maschinentyp

Machinery Masters Intelligence. Allgemeine Hinweise nur zu dieser Maschinenkategorie, kein Ersatz für die genauen Angaben des Verkäufers. Bitte bestätigen Sie die Details immer beim Verkäufer.