What types of containers can this tipper handle?

This class of equipment is typically designed to handle standard Dolav containers and common sizes of wheelie bins, often with interchangeable cradles or adjustable features.

Is this equipment suitable for washdown environments?

Yes, units manufactured from Grade 304 stainless steel with IP65 rated control panels are generally suitable for regular washdown in food processing facilities.

What are the typical safety features included?

Common safety features include fully enclosed guarding, electrically and mechanically interlocked access doors, and controls that prevent operation if doors are open or the carriage is not in the safe position.

Does this tipper require floor mounting?

For stability and safe operation, tippers of this design are typically constructed for permanent floor bolting. Buyers should confirm specific installation requirements with the seller.

Can this unit be integrated into an automated line?

While primarily standalone, many industrial tippers can be integrated into automated lines with appropriate control system interfaces. Buyers should discuss specific integration needs with the seller.

Dolav and Wheelie Bin Tipper - Lifting & Tipping, фото 1

Dolav and Wheelie Bin Tipper - Lifting & Tipping, фото 2

Dolav and Wheelie Bin Tipper - Lifting & Tipping, фото 3

Dolav and Wheelie Bin Tipper - Lifting & Tipping, фото 4

Dolav and Wheelie Bin Tipper - Lifting & Tipping, фото 5

Dolav and Wheelie Bin Tipper - Lifting & Tipping, фото 6

Dolav and Wheelie Bin Tipper - Lifting & Tipping

В наличии

Проверенный продавец

Dolav and Wheelie Bin Tipper

Name: Dolav and Wheelie Bin Tipper
SKU: BTM/2P/1250/2400/B/G
Availability: InStock

Цена: Цену уточняйте у продавца

BTM/2P/1250/2400/B/G Dolav and Wheelie Bin Tipper

This Dolav and Wheelie Bin Tipper was designed to lift and tip a either 1 off Dolav Container (1200 x 1000 x 780mm High) or 2 off 240 Litre Wheelie Bins at a discharge height of 2400mm. The Dolav and Wheelie Bin Tipper was manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is accomplished via chains driven by a motor gearbox mounted at the top of the one with a crossover shaft to the other.

Safety Guard to BS EN 14120:2015 Safety of Machinery Guards

The Dolav and Wheelie Bin Tipper was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 2.0mm stainless steel sheet which encloses the machine to a height of 2200mm on all sides with a pair of hinged guard doors on the fourth side. The guard doors are electrically and mechanically interlocked preventing the Dolav and Wheelie Bin Tipper from operating when a door is open. Additionally, the guard doors can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.

Dolav & Wheelie Bin Tipper Electrical Control

This Dolav & Wheelie Bin Tipper is fitted with an IP65 Stainless Steel Control Panel which is mounted on the Safety Guard at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). The control panel incorporates the following controls; Up, Down, Guard Release, Emergency Stop and a Reset Facility.

Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site. The Dolav & Wheelie Bin Tipper operation is latched so that pressing the ‘Up’ push button once will raise the lift to the full tip position. Once the product has been discharged, pressing the ‘Down’ push button once will return the machine to the full down position. The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Blaenau Gwent County Borough, United Kingdom

5 743 км от вас

Description

Dolav And Wheelie Bin Tipper

Model No.

BTM/2P/1250/2400/B/G

Capacity

1250 Kgs

Overall Height

4550mm

Machine Handing

Left Hand

Maximum Headroom

6150mm

Tipping Chute

Yes, Fitted To Lift Carriage

Container Description

DOLAV BOX (1200mm x 1000mm x 780mm H) 240 LITRE SUMO WHEELIE BIN

Base Arrangement

Bolted To The Floor

Control Circuit

24Vac

Electrical Rating

IP65

Limit Switches

Telemecanique/Allen Bradley

Motor Detail

2.2kW, 415V, 3 PHASE, 50 CYCLE C/W BRAKE

Gearbox Detail

SEW Eurodrive

Tensile Strength

6000 Kgs, 3000 Kgs

Lift Speed

6.4 Meters/Minute

Tension Chain

¾” Simplex

Tip Height

2400mm

Tip Angle

130 Degrees

Lift Chain

1" Simplex

Складской номер

BTM/2P/1250/2400/B/G

Machinery Masters View

Типичные сведения для этой категории оборудования. Всегда уточняйте детали у продавца.

Transferring ingredients or waste from Dolav containers or wheelie bins into processing lines or larger hoppers.
Loading raw materials into mixers, grinders, or other food processing machinery.
Elevating bulk ingredients for ergonomic dispensing at height.
Handling waste products in food production environments for disposal or further processing.

Typical capacity: Designed to lift and tip standard Dolav containers (e.g., 1200 x 1000 x 780mm) or multiple 240-litre wheelie bins.
Discharge height: Commonly provides discharge heights around 2400mm for integration with various processing equipment.
Construction material: Typically manufactured from Grade 304 stainless steel, suitable for food-grade environments.
Power supply: Units of this type commonly operate on standard industrial voltages, such as 400V, 3-phase, 50Hz.
Safety features: Often includes full safety guarding to standards like BS EN 14120:2015, with interlocked doors.
Control panel: Typically fitted with an IP65 rated stainless steel control panel for washdown environments.
Mounting: Generally designed for floor bolting to ensure stability during operation.

This class of equipment is typically designed to handle standard Dolav containers and common sizes of wheelie bins, often with interchangeable cradles or adjustable features.

Lifting and tipping equipment for food handling is valued for durability and reliability in demanding environments. Buyers typically prioritize robust construction, stainless steel components where applicable, and compliance with food safety standards. When purchasing used models, inspectors should assess mechanical wear, hydraulic system condition, and operational smoothness. Common strengths include longevity when properly maintained, efficient load handling, and adaptability to various food processing workflows. Equipment reputation generally remains strong provided previous maintenance records are documented and critical seals show minimal degradation.

Общий обзор для этого типа оборудования

Machinery Masters Intelligence. Общие рекомендации только для этой категории оборудования; они не заменяют точные характеристики от продавца. Всегда уточняйте детали у продавца.