What type of bins can this tipper handle?

This specific unit is designed for 240-litre wheelie bins. Buyers should confirm compatibility with their specific bin types and sizes with the seller.

What are the typical power requirements for a bin tipper?

Most industrial bin tippers, especially those with motor gearboxes, typically require a 3-phase electrical supply, such as 400V, 50Hz. Exact requirements should be confirmed with the seller.

Is this equipment suitable for outdoor use?

While constructed from stainless steel, the suitability for continuous outdoor exposure depends on the specific IP rating of all electrical components and overall design. Buyers should clarify this with the seller.

What maintenance is typically required for a bin tipper?

Routine maintenance commonly involves checking the drive chain tension, lubricating moving parts, inspecting electrical connections, and verifying safety interlocks. A maintenance schedule should be provided by the manufacturer.

How does the safety guarding work?

Safety guarding typically encloses the moving parts to prevent access during operation. This unit features a hinged guard door with electrical and mechanical interlocks, preventing operation when open and ensuring the lift carriage is fully down before the door can be opened.

Incinerator Wheelie Bin Tipper - Lifting & Tipping, фото 1

Incinerator Wheelie Bin Tipper - Lifting & Tipping, фото 2

Incinerator Wheelie Bin Tipper - Lifting & Tipping, фото 3

Incinerator Wheelie Bin Tipper - Lifting & Tipping, фото 4

Incinerator Wheelie Bin Tipper - Lifting & Tipping, фото 5

Incinerator Wheelie Bin Tipper - Lifting & Tipping, фото 6

Incinerator Wheelie Bin Tipper - Lifting & Tipping

В наличии

Проверенный продавец

Incinerator Wheelie Bin Tipper

Name: Incinerator Wheelie Bin Tipper
SKU: BTM/300/2100/M/G
Availability: InStock

Цена: Цену уточняйте у продавца

BTM/300/2100/M/G Incinerator Wheelie Bin Tipper

This Incinerator Wheelie Bin Tipper was designed to lift and tip a 240 Litre Wheelie Bin at a discharge height of 2100mm to load an Incinerator. The Incinerator Wheelie Bin Tipper was manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor. The lifting is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column.

Safety Guard to BS EN 14120:2015 Safety of Machinery Guards

The Incinerator Wheelie Bin Tipper was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 2.0mm stainless steel sheet. It encloses the Incinerator Wheelie Bin Tipper to a height of 2200mm on two sides, 2000mm on the tipping side with a hinged guard door on the fourth side. The guard door is electrically and mechanically interlocked preventing the Incinerator Wheelie Bin Tipper from operating when the door is open. Additionally, the guard door can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.

Incinerator Wheelie Bin Tipper Electrical Control

The Incinerator Wheelie Bin Tipper was fitted with an IP65 Stainless Steel Control Panel which is mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site.

The control panel incorporates the following controls; Up, Down, Guard Release, Emergency Stop and a Reset Facility. The Incinerator Wheelie Bin Tipper operation is latched so that pressing the ‘Up’ push button once will raise the lift to the full tip position. Once the product has been discharged, pressing the ‘Down’ push button once will return the Incinerator Wheelie Bin Tipper to the full down position. The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Blaenau Gwent County Borough, United Kingdom

5 743 км от вас

Description

Incinerator Wheelie Bin Tipper

Model No.

BTM/300/2100/M/G

Capacity

300 Kgs

Overall Height

3235mm

Machine Handing

Right Hand

Maximum Headroom

3675mm

Tipping Chute

Container Description

240 Litre Wheelie Bin

Base Arrangement

Mobile On Castors

Control Circuit

24Vac

Electrical Rating

IP65

Limit Switches

Telemecanique

Motor Detail

0.75kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE

Gearbox Detail

SEW Eurodrive

Output R.P.M

28 R.P.M.

Ratio

50:1

Tensile Strength

3000 Kgs

Lift Speed

6.4 Meters/Minute

Tip Height

2100mm

Tip Angle

135 Degrees

Load/Tension Chain

¾” Simplex

Складской номер

BTM/300/2100/M/G

Machinery Masters View

Типичные сведения для этой категории оборудования. Всегда уточняйте детали у продавца.

Loading waste incinerators with wheelie bins in industrial settings.
Transferring bulk waste materials from bins into processing machinery.
Handling and tipping materials in food processing waste streams.
Automating the emptying of standard wheelie bins into elevated hoppers or conveyors.

Typical Bin Capacity: Designed for standard 240-litre wheelie bins, though other capacities are common for this class of equipment.
Typical Discharge Height: Commonly ranges from 1500mm to 2500mm, with this unit specified at 2100mm.
Construction Material: Typically manufactured from Grade 304 stainless steel for hygiene and corrosion resistance, as seen in this unit.
Drive Mechanism: Often features a chain-driven motor gearbox system for reliable lifting.
Safety Features: Units commonly include full safety guarding to standards like BS EN 14120:2015, with interlocked access doors.
Electrical Control: Typically fitted with an IP-rated control panel, often IP65 for washdown environments.
Power Supply: For this class of industrial equipment, a 3-phase electrical supply (e.g., 400V, 50Hz) is commonly required.
Mounting: Designed for floor bolting to ensure stability during operation.

Lifting and tipping equipment for food handling is valued for durability and reliability in demanding environments. Buyers typically prioritize robust construction, stainless steel components where applicable, and compliance with food safety standards. When purchasing used models, inspectors should assess mechanical wear, hydraulic system condition, and operational smoothness. Common strengths include longevity when properly maintained, efficient load handling, and adaptability to various food processing workflows. Equipment reputation generally remains strong provided previous maintenance records are documented and critical seals show minimal degradation.

Общий обзор для этого типа оборудования

Machinery Masters Intelligence. Общие рекомендации только для этой категории оборудования; они не заменяют точные характеристики от продавца. Всегда уточняйте детали у продавца.