Disponible
Catégorie du produit : Lifting & Tipping
Accueil /
/
/
Stainless Steel Screw Lift de Base Handling Ltd, annonce dans la catégorie lifting & tipping, disponible sur Machinery Masters. Consultez les caractéristiques, demandez les coordonnées du vendeur et trouvez des machines similaires sur Machinery Masters.
Disponible
Vendeur vérifié
Base Handling Ltd - Stainless Steel Screw Lift
Copié dans le presse-papiers !
Prix : Prix sur demande auprès du vendeur
HHS/250//B Stainless Steel Screw LiftThis Stainless Steel Screw Lift was designed to lift a stainless steel receiver hopper to a height of 2292mm from the floor and had a Safe Working Load of 250 Kgs. Once at this height, it can be rotated manually to the rear to allow an Intermediate Bulk Container to be loaded into position on a Floor Mounted Scale. After the IBC is loaded, the Receiver Hopper is rotated manually by the operator to align directly above the IBC for the filling activity to take place. When an IBC is not in position, the Receiver Hopper can be lowered to the full down position which will be 626mm off the floor. At this full down position, the hopper can be manually rotated forwards towards the operator for further maintenance or hygiene access. The Stainless Steel Screw Lift was constructed from Grade 304 stainless steel and was designed be bolted to the floor with an additional brace to the access platform. The lifting is accomplished via a machined ball screw and lifting nut mounted within the lift column driven by a motor gearbox. Stainless Steel Screw Lift Electrical ControlThis Stainless Steel Screw Lift is fitted with an IP65 Stainless Steel Control Panel which is mounted at a suitable position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site. The Stainless Steel Screw Lift has dual pushbutton control complete with simultaneous relays and works on a ‘hold to run’ basis The ‘Up’ or ‘Down’ pushbuttons must be held for the Stainless Steel Screw Lift to operate and as soon as a button is released, the Stainless Steel Screw Lift will stop. There is also an additional proximity switch used to detect the top of the Matcon IBC when the lift is lowered. When the proximity switch detects the top of the Matcon IBC, the Stainless Steel Screw Lift will stop and can only be raised from that position. |
Blaenau Gwent County Borough, United KingdomÀ 5 743 km
Description
Stainless Steel Screw Lift
Model No.
HHS/250/626-2292/B
Capacity
250 Kgs
Overall Height
3744mm
Machine Handing
Left Hand
Maximum Headroom
3800mm
Container Description
Vacuum Receiver Hopper
Base Arrangement
Base Plate Bolted To The Floor
Control Circuit
24Vac
Electrical Rating
IP65
Limit Switches
Dual Proximity Sensors
Motor Detail
1.1kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE
Gearbox Detail
SEW Eurodrive
Lift Speed
4.0 Meters/Minute
Lift & Safety Nut
32mm x 20mm Pitch
Receiver Hopper Lowered
626mm
Receiver Hopper Raised
2292mm
Ball Screw
32mm Diameter x 10mm Pitch
Numéro de stock
HSS/250/626-2292/B
Machinery Masters View
Informations types pour cette catégorie de machines. Vérifiez toujours les détails auprès du vendeur.
- Elevating bulk ingredients such as powders, granules, or small components within a processing line.
- Transferring materials from floor level hoppers to higher-level processing equipment like mixers or fillers.
- Loading intermediate bulk containers (IBCs) or other receptacles with controlled product discharge.
- Facilitating ergonomic material handling by reducing manual lifting in food production environments.
- Integrating into automated or semi-automated production lines requiring precise material positioning.
Machinery Masters Intelligence. Indications générales pour cette catégorie de machines uniquement, qui ne remplacent pas les caractéristiques exactes du vendeur. Vérifiez toujours les détails auprès du vendeur.