usatoVenduto di recente
Categoria del prodotto: X-ray Inspection Systems
X-ray Inspection Systems
X-ray inspection systems see inside packed product to detect foreign bodies that a metal detector alone would miss, including glass, stone, bone and dense plastic. Beyond contamination, they check fill level, count components, spot missing items and verify seal integrity in a single pass, which makes them the broadest inspection and quality control check on a food processing line. Image resolution, belt speed and the detection software decide what a system catches and how fast. Dense and multi component packs are where the technology earns its keep. New and used X-ray systems are listed by verified sellers with resolution, throughput and condition stated plainly.
Mostri filtri
Ordini per
Più pertinenti
usatoVenduto di recente
Categoria del prodotto: X-ray Inspection Systems
Heuft Systemtechnik GMBH Examiner
usatoDisponibile
Categoria del prodotto: X-ray Inspection Systems
Loma Systems Sentry XR - XRay Machine
nuovoVenduto di recente
Categoria del prodotto: X-ray Inspection Systems
Ishida - X-ray Machine
usatoDisponibile
Categoria del prodotto: X-ray Inspection Systems
LOMA X4 X-RAY MACHINE
usatoVenduto di recente
Categoria del prodotto: X-ray Inspection Systems
CINTEX X-RAY MACHINE
usatoDisponibile
Categoria del prodotto: X-ray Inspection Systems
Bizerba X Ray Machine
usatoVenduto di recente
Categoria del prodotto: X-ray Inspection Systems
General - X-Ray Machine
usatoDisponibile
Categoria del prodotto: X-ray Inspection Systems
Safeline ADV4 Xray machine
usatoVenduto di recente
Categoria del prodotto: X-ray Inspection Systems
Eagle X Ray Machine
usatoVenduto di recente
Categoria del prodotto: X-ray Inspection Systems
Ishida IX-EN-2493-S - Used Ishida X-Ray Machine
11
Annunci attivi
9
Marchi affidabili
100%
Venditori verificati
24/7
Marketplace globale
X-ray Inspection System Types
These systems vary by how product passes the beam and by the products they suit. The main configurations are below.
Conveyor X-ray systems
These systems inspect packed product carried through the beam on a belt. They are the standard choice for finished packs needing contamination and quality checks.
Bulk flow X-ray systems
Bulk systems inspect loose product falling or flowing before packing. They suit ingredients and unpackaged product where contamination must be caught early.
Pipeline X-ray systems
Pipeline units inspect pumped liquids, pastes and slurries in a closed flow. They suit wet products handled before filling.
Multi function inspection systems
Some systems combine contamination detection with fill, count and seal checks in one pass. This makes them a single stage for both safety and quality verification.
Ultimi annunci: X-ray Inspection Systems
Perché scegliere Machinery Masters
Solo venditori verificati
Ogni venditore viene verificato prima che un solo annuncio venga pubblicato. Machinery Masters verifica inoltre l'accuratezza degli annunci, affinché gli acquirenti possano investire con fiducia in macchinari di alto valore.
Portata globale
Gli annunci provengono da venditori di tutta Europa, del Nord America e di altre aree. Questa portata amplia la scelta oltre qualsiasi rete regionale di rivenditori ed è spesso l'unico modo per trovare modelli fuori produzione in buone condizioni.
Opzioni di finanziamento flessibili
Gli annunci idonei prevedono un finanziamento tramite partner. Le condizioni sono indicate direttamente nelle pagine prodotto idonee, così il costo viene ripartito anziché esaurire il capitale circolante in un colpo solo.
Contatto diretto con il venditore
Tra acquirente e venditore non c'è alcun intermediario. Chieda la storia della manutenzione, organizzi ispezioni e tratti direttamente con la persona che conosce davvero la macchina.
Applications and Uses
X-ray inspection supports safety and quality checks that go beyond metal detection. These are the main settings.
Broad foreign body detection
X-ray finds glass, stone, bone and dense plastic as well as metal. This suits products where the contamination risk is wider than metal alone.
Fill and count verification
Systems confirm correct fill level and component count inside sealed packs. This catches faults that external checks cannot see.
Seal and pack integrity
X-ray checks for product trapped in seals and other pack faults. Catching these protects shelf life and presentation.
Dense and multi component products
Packs with dense or layered contents are where X-ray outperforms other methods. The penetrating beam inspects the whole pack regardless of product effect.
Benefits from Machinery Masters
The marketplace holds the full spread of beam configurations within its quality control range.
01
Match the beam to the product form
Belt, bulk and pipeline formats appear side by side, so choosing how your product passes the beam takes one search.
02
Wider detection at a used price
A serviced used system finds glass, stone and bone for well under the cost of a new machine. Resolution, throughput and condition appear on each listing so the value is easy to judge.
03
Generator life and safety records up front
Speak with the seller about generator hours, image sharpness and current safety certification before you commit. On equipment that must satisfy an auditor, that evidence is worth as much as the price.
Frequently Asked Questions su X-ray Inspection Systems
X-ray finds a broader range of foreign bodies including glass, stone, bone and dense plastic, not just metal. It also checks fill, count and seal integrity in the same pass. Choose X-ray where your contamination risk is wide or you need internal quality checks that a detector cannot provide.
Ask for evidence it detects the required test pieces at your line speed and that the image quality is still sharp. Confirm the generator and detector are within life and the reject mechanism fires reliably. Check the radiation safety interlocks and shielding are intact and certified before use.
Properly maintained systems fully shield the beam and use interlocks so operators are not exposed. Confirm the shielding and safety interlocks are intact and the system holds current safety certification. Have a qualified engineer check a second hand unit before it goes into service.
Your production rate, pack size and product density set the specification. Denser and thicker products need more penetrating power and higher resolution. Confirm the belt speed, aperture and image capability suit your product before buying.
Each listing gives a direct line to the seller, so you can ask about detection performance, generator life and safety certification. No intermediary sits in the exchange. That direct contact lets you confirm the system suits your product and line before you commit.