How a thread rolling machine works, the main types, what rolled threads offer over cut ones, and how to choose and source new or used equipment for your plant.
Food Processing

Thread Rolling Machines: Types, Uses and How to Choose

Thread rolling machine forming a metal thread

How a thread rolling machine works, the main types, what rolled threads offer over cut ones, and how to choose and source new or used equipment for your plant.

Jo

Josh Bray

Nov 17, 2026

!Thread rolling machine forming a metal thread

A thread rolling machine forms threads by pressing hardened steel dies into a round blank, so the metal is reshaped instead of cut away. For most production buyers the choice comes down to three things: the die arrangement (flat, cylindrical or planetary), the material and size of the part, and the volume you need to run. If you are sourcing a machine, new or used, those three answers narrow the field quickly, and a marketplace where you can filter by requirement and talk directly to sellers saves the most time.

This guide is written for plant managers, operators and procurement teams. It explains what the machine does, the types, where rolling beats cutting, what to check before you buy, and how two related machines, the edge grinder and the double grinding machine, fit into the picture.

TL;DR

  • A thread rolling machine cold-forms external threads by displacing metal with matched hardened dies, with no chips and no material removal.
  • The three main methods are flat-die, cylindrical-die and planetary rolling. Part size, shape and volume decide which one fits.
  • Rolled threads can offer higher tensile, shear and fatigue strength than cut threads, but the material must be ductile enough to be rolled.
  • Check die alignment, feeding and automation, die life and shoulder clearance before you commit to a machine.
  • Edge grinders and double grinding machines are different tools: one deburrs and rounds edges, the other grinds two faces flat and parallel at once.

Table of Contents

What a thread rolling machine does

A thread rolling machine forms threads, and sometimes other helical or ring-shaped forms, by pressing hardened-steel die impressions into a cylindrical or conical blank. ASM International's handbook chapter on thread rolling describes it as a cold-forming process. Nothing is cut. The die profile is pushed into the surface, the metal flows outward into the crests, and the thread is finished in a few seconds per part.

The dies either rotate (in cylindrical machines) or reciprocate (in flat-die machines) to reshape the blank without making chips, according to Today's Machining World. The same article stresses that the dies must be exactly matched and aligned. Misalignment can cause overlaps, cracks, folds, seams or craters, and some of those internal defects only show up under metallographic inspection.

That last point matters when you buy. A machine is only as good as its setup and its dies, so rigidity, alignment and condition of the die spindles deserve more attention than the nameplate speed.

What it is used for

The typical product is a screw, bolt, stud or threaded rod. Rolling machines also form splines, worms, knurls, serrations and annular grooves. Because the process suits large batches, it sits at the heart of fastener production, but it also appears in plants making hydraulic fittings, shafts, tubes and other turned parts that need a strong thread.

Types of thread rolling machines

There are three main methods. Each suits different parts and volumes, as summarized in a 2021 technical guide to thread rolling machines.

Type How it works Best suited to
Flat-die One stationary die and one moving die roll the blank between them The predominant choice for standard screws and bolts
Cylindrical-die (two-die or three-die) Round dies rotate around the part, which can be fed radially or through Larger fasteners, hollow parts, and parts needing tight form control
Planetary The blank rolls between a rotating center die and curved segments Large-volume runs of similar parts

Flat-die machines

Flat-die machines are the workhorse for headed fasteners. Blanks drop from a hopper or feed track, roll between the dies, and exit finished. They are fast and relatively simple, which is why they dominate standard screw and bolt production.

Cylindrical-die machines

Cylindrical machines use two or three round dies. ASM lists radial infeed, tangential feed, through feed, planetary and internal methods among the cylindrical-die classifications. Radial infeed presses the dies into a stationary, rotating part. Through feed passes a long part axially between angled dies, which suits long threaded bars. These machines are the usual answer for hollow parts and larger diameters, where a flat die cannot support the work.

!Round dies forming a long threaded bar

Planetary machines

Planetary rolling targets high-volume runs of similar parts. If you run millions of identical pieces and the changeover is rare, it deserves a look. For mixed, short-run work it is rarely the first pick.

Rolled threads versus cut threads

People searching this topic often ask whether rolled threads are better than cut ones, and what the drawbacks are. The honest answer depends on the part.

Where rolling wins. Today's Machining World reports that rolled threads can have higher tensile, shear and fatigue strength than cut threads, and the chipless process avoids material removal. Güldner's thread production guide adds that rolling is attractive for large batches because it avoids chip loss and can yield continuous grain flow, work hardening, smooth flanks and wear resistance. In practice that means less scrap, a smoother surface and a longer-lived thread.

What limits it. Rolling displaces material, so the metal has to flow. The same Güldner guide says it is not suitable for especially brittle materials such as grey cast iron, extremely soft materials such as lead, or plastics. It cites a working envelope of at least 6% elongation and a tensile strength of at most 1,400 N/mm². If your parts fall outside that, cutting or grinding remains the route.

!Comparison of rolled and cut thread production

Geometry matters too. Axial movement of the workpiece during rolling can limit how close to a shoulder you can fully thread, particularly with blunt or deep profiles or large lead angles, as Evirt Italia's guide notes. Check the drawing for the thread run-out before you pick a machine.

How to choose a thread rolling machine

Work through these questions in order. They follow the selection factors laid out in the technical guide cited above and in ASM's chapter.

  1. Part size and geometry. Diameter, length, hollow or solid, and how close the thread sits to a head or shoulder. These decide flat versus cylindrical dies and the machine's capacity.
  2. Material. Confirm the material can be rolled. ASM names metal rollability, flaking and seaming as characteristics to assess. Hardness and ductility set the force you need and the life of your dies.
  3. Volume and changeover. A high-volume single part points to flat-die or planetary. Frequent changes between part numbers favor machines with quick die change and simple setup.
  4. Feeding and automation. Hoppers, tracks, robot loading and part handling affect real output more than rated speed. Ask what feeding equipment comes with the machine and what you will need to add.
  5. Die life and thread form. Dies are a running cost. Thread form, rolling fluid and material all influence how long they last. Confirm that dies for your thread standard exist and are available.
  6. Condition and setup rigidity. For a used machine, inspect spindle play, slide wear, hydraulic condition and die seating, since alignment drives thread quality.

Checking a used machine

Used machines are common in this category because well-built rollers last for decades. When you inspect one, ask for a video of it running your part or a similar one, the service history, the die set included, and the control type. Verify that the controls and spare parts are still supported. Agree the inspection and handover terms in writing with the seller, including who arranges loading and shipping.

Edge grinder machines and double grinding machines

Two related searches often sit next to thread rolling, because plants that roll threads usually also finish edges and faces. They are different machines for different jobs.

Edge grinder. An edge grinder works on the edges of a part: it removes burrs after cutting or punching, and rounds or chamfers sharp edges. Configurations vary by material, from sheet metal to wood and plastic, so state the material and the edge condition you need when you specify one.

Double grinding machine. Usually this means double-disc grinding. Nifty Bar's double-disc grinding page explains that workpieces pass between two counter-rotating wheels, removing material from both faces in one operation to produce flat, parallel surfaces and controlled thickness. Typical parts include shims, spacers, washers, gears, laminations, valve plates and connecting rods.

A 2022 IMTS product preview notes that double-disc grinding can improve parallelism and flatness of opposing faces and is readily automated for high-production work in automotive, aerospace, marine and medical components. Nifty Bar's 2023 overview says suitability depends on material, stock removal, starting flatness, part size and tooling arrangement, and that it is especially effective when both faces need similar treatment.

The difference in one line: an edge grinder treats the perimeter of a part, a double-disc grinder treats its two faces, and a thread roller forms its profile by displacement. A fastener line might use a roller for the thread and a face grinder for flat washers or spacers.

Sourcing new or used machines

After choosing the method, the practical question is where to find the machine. Most plants either go through a dealer's own stock list, a manufacturer's order book, or an online marketplace. A marketplace gives you a wider pool in one search, which matters for specialist machines where stock is spread across many sellers and countries.

What to ask of any listing:

  • Year, make, model and die capacity, plus what dies and tooling are included.
  • Hours or usage history and the reason for sale.
  • Photos and video of the machine, ideally running.
  • Location, loading arrangements and who handles export paperwork.
  • Whether financing is available for the purchase.

Where Machinery Masters fits

Machinery Masters is a global marketplace for new and used industrial processing machinery. Buyers use it free of charge, and you can enquire, negotiate and arrange inspection directly with sellers. The platform offers real-time inventory, equipment matching by your requirements, and equipment finance options through integrated partners. Sellers pay a subscription to list and keep 100% of their sale price, with no sales commission deducted.

For plants that process metal parts alongside food, lab or packaging lines, the Industrial Plant Equipment category is the place to start. You can describe the part, material and volume you need, and let the requirements guide the search. If you run a food or bakery operation, the Food Processing and Packaging Equipment categories cover the lines around it.

!Machinerymasterslive

If you have machines to move on, listing them reaches verified buyers globally. Start from the Machinery Masters home page to browse or to list.

Our view on buying a thread rolling machine

Most buyers start with the machine and end up fighting the part. We would reverse that. Write down the thread standard, the material grade, the shoulder clearance and the yearly volume first, then look for the die arrangement that fits.

The second thing we see as decisive is access. Specialist machines are rarely sitting in one place, so a buyer who can search stock across many sellers, speak to them directly and ask for running footage has a real advantage over one who waits for a quote.

That is why we built Machinery Masters around direct contact between verified buyers and sellers, requirement-based matching and financing options, with no cost to the buyer. A good used roller with the right dies, bought on clear terms, can earn its keep for many more years.

Josh

FAQ

What does a thread rolling machine do?

It forms external threads by pressing matched hardened steel dies against a round blank. The metal is reshaped rather than cut, so the process makes no chips. It is widely used for screws, bolts, studs and threaded rods.

What are the disadvantages of thread rolling?

The material must be ductile enough to flow under the dies, so brittle metals such as grey cast iron are not suitable. Dies must be precisely matched and aligned, or defects such as laps and seams can occur. Threading right up to a shoulder can also be limited by the geometry of the part.

What are the different types of thread rolling machines?

The three main types are flat-die, cylindrical-die (two-die or three-die) and planetary machines. Flat-die suits standard screws and bolts, cylindrical suits larger or hollow parts, and planetary suits large runs of similar parts.

Are rolled threads better than cut threads?

For strength and surface finish, often yes. Rolled threads can have higher tensile, shear and fatigue strength, and the process wastes no material. Cutting remains necessary for materials that cannot be rolled or for shapes the dies cannot reach.

What is the difference between an edge grinder and a double grinding machine?

An edge grinder works on part edges, for example removing burrs or rounding corners. A double grinding machine, usually a double-disc grinder, passes parts between two wheels to grind both faces flat and parallel in one pass.

Sources

Created with BabyLoveGrowth AI

More Posts Like This