Incubators (CO₂, Shaking, Cooled, ID)
CO2, shaking, cooled and ID incubators hold cultures and samples at a precise, stable temperature, and this category covers the main variants for cell, microbial and specialist work. CO2 models add regulated carbon dioxide and humidity for mammalian cell culture, shaking chambers combine controlled temperature with orbital agitation for microbial growth, and cooled units reach below ambient for temperature sensitive protocols. Chamber volume, temperature range and, on gas models, CO2 control are the specifications that decide the fit. Whether you culture cell lines, grow bacterial cultures or need a cooled chamber, the used and new units listed here come from verified sellers with configuration and condition detailed upfront.
Show Filters
1
Live Listing
1
Trusted Brand
100%
Verified Sellers
24/7
Global Marketplace
Incubator Types
These chambers vary by the conditions they control and by chamber size. The main variants are below.
CO2 incubators
These chambers hold set temperature, humidity and carbon dioxide for mammalian cell culture. Reliable gas control and a clean, contamination resistant interior are what matter most.
Shaking incubators
These units combine controlled temperature with orbital agitation to grow microbial and cell cultures in flasks. Orbit diameter and platform capacity set the culture volume and vessel numbers.
Cooled incubators
Cooled models reach below ambient temperature for BOD, storage and temperature sensitive work. The lower temperature range is the specification that distinguishes them from heated only designs.
Standard microbiological incubators
Heated air models hold bacterial and fungal cultures at a set temperature without added gas. They are the everyday choice for routine microbiology.
Latest Incubators (CO₂, Shaking, Cooled, ID) Listings
Why Choose Machinery Masters
Verified Sellers Only
Every seller is verified before a single listing goes live. Machinery Masters also reviews listings for accuracy, so buyers can commit to high value machinery with confidence.
Global Reach
Listings come from sellers across Europe, North America, and beyond. That reach widens the options past any regional dealer network, and it is often the only way to find discontinued models in good condition.
Flexible Financing Options
Qualifying listings carry financing through partner providers. Terms are shown directly on eligible product pages, spreading the cost instead of draining working capital in one hit.
Direct Seller Contact
No broker sits between the buyer and the seller. Ask about service history, arrange inspections, and negotiate directly with the person who actually knows the machine.
Applications and Uses
These chambers support any work that needs cultures or samples held at controlled conditions. These are the main settings.
Mammalian cell culture
CO2 models hold cell lines at body temperature with regulated gas and humidity. Stable conditions protect cell health through growth and assays.
Microbial growth and fermentation
Shaking units grow bacterial and yeast cultures in flasks with controlled agitation. Even temperature and orbit give consistent, reproducible growth.
Environmental and BOD testing
Cooled models hold samples at low temperatures for biochemical oxygen demand and stability testing. The below ambient range is essential for these protocols.
General microbiology
Standard chambers hold plates and cultures at set temperatures for routine identification and growth. They are a staple of any microbiology laboratory.
Benefits from Machinery Masters
As part of the thermal processing and environmental control family, the marketplace groups the incubator variants so the right chamber is easy to find.
Every incubator variant in one place
CO2, shaking, cooled and ID incubators sit together in a single category. Matching the chamber to your culture work is simpler with the variants side by side.
Serviced culture chambers against new cost
A well maintained used incubator holds conditions as well as a new one for less outlay. Listings state the chamber size, control features and condition so the value is clear.
Ask the seller about gas and calibration
On a CO2 model you can confirm the gas sensor and calibration status directly before buying. That check matters more than the headline specification on a culture instrument.
Frequently Asked Questions About Incubators (CO₂, Shaking, Cooled, ID)
Confirm the temperature and CO2 controls hold steady and the gas sensor calibrates correctly, since sensor drift is a common issue. Check the interior for cleanliness and any sign of past contamination, and confirm the humidity system and door seal are sound. A recent calibration and a clean chamber tell you the unit has been looked after.
Match the variant to your work, since mammalian cells need CO2 and humidity while microbial flasks need a shaking chamber. Cooled models are essential for below ambient protocols such as BOD testing. Decide the conditions your cultures require first, then pick the design that delivers them.
Count the plates, dishes or flasks you run at once and pick a chamber that holds them with room for airflow. For a shaking model, check the platform takes your flask sizes and the orbit suits your cultures. Too small a chamber means repeat runs, while too large a one burns energy and floor space.
CO2 models need a carbon dioxide supply and, on some units, water for humidity. All run from a mains supply, and larger units may need a dedicated circuit. Confirm the gas connection, water and power requirements with the seller before installing.
Financing is offered on qualifying listings, which helps spread the cost of larger or multiple units. When a listing carries a finance option, it is shown there. It is worth mentioning to the seller at the enquiry stage so you can gauge how it fits your budget.