What type of containers can this tipper handle?

This class of equipment is specifically designed to handle standard 400 lbs (200-litre) dump buggies, also known as Eurobins or tote bins.

Is this unit suitable for high-care food processing environments?

Yes, units constructed from Grade 304 stainless steel with welded construction are typically suitable for high-care areas due to ease of cleaning and corrosion resistance.

What are the common power requirements for a dump buggy tipper?

Units of this type commonly operate on a 3-phase electrical supply, with voltage specifications varying by region. Buyers should confirm exact requirements with the seller.

How is safety ensured during operation?

Safety is typically ensured through comprehensive guarding, often to BS EN 14120:2015 standards, with electrically and mechanically interlocked doors that prevent operation when open and access when a load is raised.

Can this tipper be integrated into an existing processing line?

Yes, with its fixed discharge height and floor-mounted design, this equipment is commonly integrated into existing lines, often feeding into chutes, hoppers, or other machinery.

What maintenance is typically required for this equipment?

Routine maintenance typically involves checking the chain and gearbox, lubricating moving parts, and inspecting electrical connections and safety interlocks. Regular cleaning is also essential for hygiene.

Dump Buggy Tipper - Lifting & Tipping, photo 1

Dump Buggy Tipper - Lifting & Tipping, photo 2

Dump Buggy Tipper - Lifting & Tipping, photo 3

Dump Buggy Tipper - Lifting & Tipping, photo 4

Dump Buggy Tipper - Lifting & Tipping, photo 5

Dump Buggy Tipper - Lifting & Tipping, photo 6

Available

Verified seller

Base Handling Ltd - Dump Buggy Tipper

Name: Dump Buggy Tipper
Brand: Base Handling Ltd
SKU: BTM/300/2000/B/G-
Availability: InStock

Price: Contact seller for price

BTM/300/2000/B/G Single Pillar Dump Buggy Tipper.

This Dump Buggy Tipper is designed to lift and tip a standard 400 lbs Dump Buggy at a discharge height of 1600mm.

The Dump Buggy Tipper is manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be bolted to the floor.

The lifting is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column.

The Dump Buggy Tipper was tipping waste from a High Care Area into a chute feeding in the Low Care Area.

The Waste Chute had a pneumatically operated lid which opened when the Dump Buggy Tipper began to lift with a bin location frame mounted in the Low Care side.

Safety Guard to BS EN 14120:2015 Safety of Machinery Guards.

This Dump Buggy Tipper was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards.

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 2.0mm stainless steel sheet.

It encloses the Dump Buggy Tipper to a height of 2200mm on two sides, 1800mm at the tipping position with a hinged guard door on the fourth side.

The guard door is electrically and mechanically interlocked preventing the Dump Buggy Bin Tipper from operating when the door is open.

Additionally, the guard door can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.

Dump Buggy Tipper Electrical Control.

This Dump Buggy Tipper is fitted with an IP65 Stainless Steel Control Panel which is mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER).

Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site.

The control panel incorporates the following controls:

Up
Down
Guard Release
Emergency Stop
a Reset Facility.

Once an operator has loaded a Dump Buggy into the tipper and closed the guard door the Start button can be pressed.

The Dump Buggy Tipper will begin to lift and in doing so will release a pneumatic limit switch that operates a pneumatic cylinder to open the chute lid.

The Dump Buggy Tipper will then proceed to full tip and return to the floor automatically.

When it gets back to the floor, it will remake the limit switch and close the chute lid thereby maintaining the integrity of the High Care area.

The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Blaenau Gwent County Borough, United Kingdom

5,743 km away

Description

Dump Buggy Tipper

Model No.

BTM/300/2000/B/G

Capacity

300 Kgs

Overall Height

2850mm

Machine Handing

Left Hand

Maximum Headroom

4000mm

Tipping Chute

Separate Waste Transfer Chute

Container Description

400 lbs Dump Buggy

Base Arrangement

Bolted To The Floor

Control Circuit

24Vac

Electrical Rating

IP65

Limit Switches

Telemecanique

Motor Detail

0.75kW, 480V, 3 PHASE, 60 CYCLE, c/w BRAKE

Gearbox Detail

SEW Eurodrive

Output R.P.M

28 R.P.M.

Ratio

50:1

Tensile Strength

3000 Kgs

Lift Speed

6.4 Meters/Minute

Tip Height

2000mm

Tip Angle

135 Degrees

Load/Tension Chain

¾” Simplex

Stock Number

BTM/300/2000/B/G-

Machinery Masters View

Typical context for this category of equipment. Always confirm specifics with the seller.

Transferring ingredients or waste between processing stages in food manufacturing.
Loading raw materials into hoppers, mixers, or other processing machinery.
Discharging finished products into packaging lines or storage containers.
Handling bulk ingredients in bakeries, dairies, and meat processing plants.
Facilitating ergonomic and safe material handling in high-care environments.

Typical capacity: Designed to lift and tip standard 400 lbs (approximately 180 kg) dump buggies.
Discharge height: Commonly around 1600mm, suitable for feeding into various chutes or hoppers.
Construction material: Typically Grade 304 stainless steel, with welded construction for hygiene and durability.
Mounting: Designed to be bolted to the floor for stability and safety.
Lifting mechanism: Often features a simplex chain driven by a motor gearbox, mounted at the top of the column.
Safety features: Includes safety guarding to standards such as BS EN 14120:2015, with interlocked doors.
Electrical control: Typically fitted with an IP6x rated electrical control system for protection against ingress.
Footprint: Varies by model, but generally designed for efficient use of space within a processing line.

This class of equipment is specifically designed to handle standard 400 lbs (200-litre) dump buggies, also known as Eurobins or tote bins.

Lifting and tipping equipment for food handling is valued for durability and reliability in demanding environments. Buyers typically prioritize robust construction, stainless steel components where applicable, and compliance with food safety standards. When purchasing used models, inspectors should assess mechanical wear, hydraulic system condition, and operational smoothness. Common strengths include longevity when properly maintained, efficient load handling, and adaptability to various food processing workflows. Equipment reputation generally remains strong provided previous maintenance records are documented and critical seals show minimal degradation.

General overview for this equipment type

Machinery Masters Intelligence. General guidance for this category of equipment only, not a substitute for the seller's exact specifications. Always confirm details with the seller.