What type of bins can this tipper accommodate?

This tipper is designed for specific bin types, often with customisable cradles. Buyers should confirm compatibility with their existing bins or specify requirements to the seller.

What are the typical power requirements for a recycling tipper?

Units of this size typically operate on a 3-phase electrical supply, commonly 400V. Exact power consumption will depend on motor size and lift capacity.

Is this unit suitable for outdoor use?

While constructed from stainless steel and featuring an IP65 control panel, prolonged outdoor exposure may require additional weatherproofing. Buyers should confirm suitability with the seller.

What maintenance is typically required for a chain-driven tipper?

Routine maintenance typically involves lubrication of the chain and moving parts, inspection of chain tension, and checking electrical connections and safety interlocks. Refer to the manufacturer's manual for specific schedules.

Can the discharge height be adjusted?

For this class of equipment, the discharge height is usually fixed as per its original design. Any adjustments would likely require significant modification and should be discussed with the seller or a qualified engineer.

Recycling Tipper - Bin Tippers and Dumpers, photo 1

Recycling Tipper - Bin Tippers and Dumpers, photo 2

Recycling Tipper - Bin Tippers and Dumpers, photo 3

Recycling Tipper - Bin Tippers and Dumpers, photo 4

Recycling Tipper - Bin Tippers and Dumpers, photo 5

Recycling Tipper - Bin Tippers and Dumpers, photo 6

Recycling Tipper - Bin Tippers and Dumpers

Available

Verified seller

Base Handling Ltd - Recycling Tipper

Name: Recycling Tipper
Brand: Base Handling Ltd
SKU: BTM/200/2700/M/G
Availability: InStock

Price: Contact seller for price

BTM/200/2700/M/G Recycling Tipper.

This Recycling Tipper was a single pillar tipper designed to lift and tip a bin of recycled metals at a discharge height of 2700mm into a Bailer.

The machine was manufactured from Grade 304 stainless steel and is a welded construction throughout.

The Recycling Tipper was mobile on castors to allow it to moved away for maintenance access to the Bailer.

The lifting is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column.

Safety Guard to BS EN 14120:2015 Safety of Machinery Guards.

The Recycling Tipper was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards.

The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 2.0mm stainless steel sheet.

It encloses the Recycling Tipper to a height of 2200mm on three sides with a hinged guard door on the fourth side.

The guard door is electrically and mechanically interlocked preventing the machine from operating when the door is open.

Additionally, the guard door can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised.

Recycling Tipper Electrical Control.

The Recycling Tipper was fitted with an IP65 Steel Control Panel mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER).

Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site.

The control panel incorporates the following controls;

Up
Down
Guard Release
Emergency Stop
Reset Facility.

The Recycling Tipper operation is latched so that pressing the ‘Up’ push button once will raise the lift to the full tip position.

Once the product has been discharged, pressing the ‘Down’ push button once will return the Recycling Tipper to the full down position.

The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Blaenau Gwent County Borough, United Kingdom

5,743 km away

Description

Recycling Tipper

Model No.

BTM/200/2700/M/G

Capacity

200 Kgs

Overall Height

4035mm

Machine Handing

To Be Confirmed

Maximum Headroom

4500mm

Tipping Chute

Yes, Fitted To Lift Carriage

Container Description

Wheeled Bins

Base Arrangement

Mobile On Castors

Control Circuit

24Vdc

Electrical Rating

IP65

Limit Switches

Telemecanique

Motor Detail

0.75kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE

Gearbox Detail

SEW Eurodrive

Output R.P.M

28 R.P.M.

Ratio

50:1

Tensile Strength

3000 Kgs

Lift Speed

6.4 Meters/Minute

Tip Height

2700mm

Tip Angle

135 Degrees

Load/Tension Chain

¾” Simplex

Stock Number

BTM/200/2700/M/G

Machinery Masters View

Typical context for this category of equipment. Always confirm specifics with the seller.

Used for controlled discharge of materials from bins into processing equipment such as balers, compactors, or shredders.
Suitable for waste management and recycling facilities to transfer various types of recyclable materials.
Applicable in food processing for emptying ingredients or waste into hoppers or conveyors.
Utilised in manufacturing for ergonomic loading of components or raw materials into production lines.

Construction Material: Units of this type, especially for recycling or food applications, commonly feature Grade 304 stainless steel for hygiene and corrosion resistance.
Discharge Height: This class of equipment typically offers discharge heights ranging from 1500mm to 3000mm, with 2700mm being suitable for feeding balers.
Bin Type Compatibility: Designed to accommodate standard industrial bins, often with customisable cradles for specific bin dimensions.
Lifting Mechanism: Commonly employs a chain-driven system, often a Simplex chain, powered by a motor gearbox for reliable lifting.
Mobility: Many units are mobile on castors, allowing for repositioning for maintenance or operational flexibility.
Safety Guarding: Typically includes comprehensive safety guarding to standards like BS EN 14120:2015, with interlocked access doors.
Electrical Control: Control panels are commonly IP65 rated for dust and water ingress protection, mounted for convenient access and compliance with PUWER.

This tipper is designed for specific bin types, often with customisable cradles. Buyers should confirm compatibility with their existing bins or specify requirements to the seller.

Bin tippers and dumpers are valued across waste management, recycling, and manufacturing sectors for their reliability and durability. Buyers typically prioritise robust construction, hydraulic system condition, and container compatibility when purchasing used models. Industry sentiment favours equipment with well-maintained lifting mechanisms and minimal corrosion. Common strengths include straightforward operation, longevity with proper maintenance, and cost efficiency compared to new units. Potential buyers should inspect wear on hydraulic cylinders, structural integrity of the bin, and service history before purchase.

General overview for this equipment type

Machinery Masters Intelligence. General guidance for this category of equipment only, not a substitute for the seller's exact specifications. Always confirm details with the seller.