What type of dump buggies can this unit handle?

This class of equipment is specifically designed to accommodate standard 200-litre dump buggies. Buyers should confirm compatibility with their existing buggy fleet.

Is this unit suitable for washdown environments?

Given its Grade 304 stainless steel construction and IP65 rated control panel, units of this type are generally suitable for regular washdown in food processing environments. Always verify specific IP ratings.

What are the typical safety features of such a lifter?

Common safety features include a 'hold to run' control, upper and lower end-of-travel limit switches, and a safety latch system to prevent uncontrolled descent in case of chain failure. Operators should always adhere to PUWER regulations.

Can the discharge height be adjusted?

While the primary discharge height is fixed for this unit, the limit switches are typically adjustable by trained personnel for fine-tuning on site. Significant height changes usually require a different model.

What maintenance is typically required for this type of equipment?

Routine maintenance typically involves checking chain tension, lubricating moving parts, inspecting electrical connections, and ensuring all safety features are operational. Regular cleaning is also essential for hygiene.

Does this unit require permanent installation?

Many units of this type are designed to be mobile on castors, offering flexibility in placement without permanent installation. However, stable and level flooring is always recommended for safe operation.

Dump Buggy Lifter Tipper - Lifting & Tipping, photo 1

Dump Buggy Lifter Tipper - Lifting & Tipping, photo 2

Dump Buggy Lifter Tipper - Lifting & Tipping, photo 3

Dump Buggy Lifter Tipper - Lifting & Tipping, photo 4

Dump Buggy Lifter Tipper - Lifting & Tipping, photo 5

Dump Buggy Lifter Tipper - Lifting & Tipping, photo 6

Dump Buggy Lifter Tipper - Lifting & Tipping

Available

Verified seller

Dump Buggy Lifter Tipper

Name: Dump Buggy Lifter Tipper
SKU: BTM/300/1350/M

Price: Contact seller for price

BTM/300/1350/M Dump Buggy Lifter Tipper

The Dump Buggy Lifter Tipper was designed to lift and tip a 200 Litre Dump Buggy at a discharge height of 1350mm into an intermediate chute. The Dump Buggy Lifter Tipper was manufactured from Grade 304 stainless steel, is a welded construction throughout and is designed to be mobile on castors. The lifting is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column. The unguarded machine is fitted with our unique safety latch which engages automatically in the extremely unlikely event of a lift chain failure.

Dump Buggy Lifter Tipper Electrical Control

The Dump Buggy Lifter Tipper was fitted with an IP65 Stainless Steel Control Panel mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site.

The unguarded Dump Buggy Lifter Tipper operates on a ‘hold to run’ principle such that the ‘Up’ or ‘Down’ pushbuttons must be held for the Dump Buggy Lifter Tipper to operate. As soon as either button is released, the Dump Buggy Lifter Tipper will stop. The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required.

Blaenau Gwent County Borough, United Kingdom

5,762 km away

Description

Dump Buggy Lifter Tipper

Model No.

BTM/300/1350/M

Capacity

300 Kgs

Tipping Angle

130 Degrees

Overall Height

2289mm

Machine Handing

Right Hand

Maximum Headroom

4500mm

Tipping Chute

Yes, Intermediate Chute Fitted To Front Of Tipper

Container Description

200 LITRE DUMP BUGGY

Base Arrangement

Mobile On Castors

Control Circuit

24Vac

Electrical Rating

IP65

Limit Switches

Telemecanique

Motor Detail

0.55kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE

Gearbox Detail

SEW Eurodrive

Output R.P.M

28 R.P.M.

Ratio

50:1

Tensile Strength

3000 Kgs

Lift Speed

6.4 Meters/Minute

Tip Height

1350mm

Load/Tension Chain

¾” Simplex

Stock Number

BTM/300/1350/M

Machinery Masters View

Typical context for this category of equipment. Always confirm specifics with the seller.

Applications & Use Cases

Transferring minced meat, dough, or other food ingredients from dump buggies into processing machinery.
Loading ingredients into mixers, grinders, or hoppers at elevated heights.
Facilitating ergonomic material handling in food production lines.
Moving bulk ingredients within a processing facility to maintain workflow.
Discharging raw materials or finished products into packaging lines or storage containers.

Typical Specifications

Typical capacity: Designed to lift and tip standard 200-litre dump buggies.
Discharge height: Commonly around 1350mm, suitable for feeding intermediate chutes or processing equipment.
Material construction: Typically Grade 304 stainless steel, welded construction for hygiene and durability.
Mobility: Often mobile on castors for flexible positioning within a facility.
Lifting mechanism: Commonly a simplex chain driven by a motor gearbox.
Electrical control: IP65 rated stainless steel control panel, often with 'hold to run' operation for safety.
Safety features: Units of this type often include safety latches for chain failure and end-of-travel limit switches.
Power supply: Typically 3-phase industrial power, voltage to be confirmed with seller.

Frequently Asked Questions

This class of equipment is specifically designed to accommodate standard 200-litre dump buggies. Buyers should confirm compatibility with their existing buggy fleet.

Machinery Masters Intelligence. General guidance for this category of equipment only, not a substitute for the seller's exact specifications. Always confirm details with the seller.