Available
Product category: Lifting & Tipping
Home /
/
/
Recycling Tipper lifting & tipping listing available on Machinery Masters. Browse specifications, request seller details, and find similar equipment on Machinery Masters.
Available
Verified seller
Recycling Tipper
Copied to clipboard!
Price: Contact seller for price
BTM/200/2700/M/G Recycling TipperThis Recycling Tipper was a single pillar tipper designed to lift and tip a bin of recycled metals at a discharge height of 2700mm into a Bailer. The machine was manufactured from Grade 304 stainless steel and is a welded construction throughout. The Recycling Tipper was mobile on castors to allow it to moved away for maintenance access to the Bailer. The lifting is achieved by a ¾” Simplex chain driven by a motor gearbox mounted at the top of the main column. Safety Guard to BS EN 14120:2015 Safety of Machinery GuardsThe Recycling Tipper was supplied complete with a safety guard to meet the guidelines of BS EN 14120:2015 Safety of Machinery Guards. The safety guard is constructed from 40 x 40 x 3mm stainless steel box section and 2.0mm stainless steel sheet. It encloses the Recycling Tipper to a height of 2200mm on three sides with a hinged guard door on the fourth side. The guard door is electrically and mechanically interlocked preventing the machine from operating when the door is open. Additionally, the guard door can only be opened when the lift carriage is at the full down position to prevent access whilst a load is raised. Recycling Tipper Electrical ControlThe Recycling Tipper was fitted with an IP65 Steel Control Panel mounted on the main column at a convenient position to give good maintenance access under the Provision and Use of Work Equipment Regulation 1998 (PUWER). Upper and Lower end of travel limit switches are positioned to prevent inadvertent adjustment or damage but are easily adjustable by trained personnel for fine adjustment on site. The control panel incorporates the following controls; Up, Down, Guard Release, Emergency Stop and a Reset Facility. The Recycling Tipper operation is latched so that pressing the ‘Up’ push button once will raise the lift to the full tip position. Once the product has been discharged, pressing the ‘Down’ push button once will return the Recycling Tipper to the full down position. The control panel has a volt free pair of contacts which can be used to connect a ‘Call to Run’ signal if required. |
Blaenau Gwent County Borough, United Kingdom5,762 km away
Description
Recycling Tipper
Model No.
BTM/200/2700/M/G
Capacity
200 Kgs
Overall Height
4035mm
Machine Handing
To Be Confirmed
Maximum Headroom
4500mm
Tipping Chute
Yes, Fitted To Lift Carriage
Container Description
Wheeled Bins
Base Arrangement
Mobile On Castors
Control Circuit
24Vdc
Electrical Rating
IP65
Limit Switches
Telemecanique
Motor Detail
0.75kW, 415V, 3 PHASE, 50 CYCLE c/w BRAKE
Gearbox Detail
SEW Eurodrive
Output R.P.M
28 R.P.M.
Ratio
50:1
Tensile Strength
3000 Kgs
Lift Speed
6.4 Meters/Minute
Tip Height
2700mm
Tip Angle
135 Degrees
Load/Tension Chain
¾” Simplex
Stock Number
BTM/200/2700/M/G
Machinery Masters View
Typical context for this category of equipment. Always confirm specifics with the seller.
Applications & Use Cases
- Tipping bulk materials from bins into processing equipment or larger containers.
- Loading balers or compactors with recycled goods, such as metals or plastics.
- Transferring ingredients or waste products within a food processing line.
- Handling and emptying bins of various materials in manufacturing and logistics.
- Automating the discharge of contents from standard or custom bins.
Typical Specifications
- Typical capacity
- Units of this class commonly handle bins ranging from 100kg to 500kg, depending on design and intended use.
- Discharge height
- For this class of equipment, discharge heights typically range from 1500mm to 3000mm, designed to suit receiving equipment.
- Construction material
- Often manufactured from Grade 304 stainless steel for hygiene and corrosion resistance, particularly in food or recycling applications.
- Power supply
- Typically requires a 3-phase electrical supply, commonly 400V, 50Hz, with a motor gearbox for lifting.
- Safety features
- Units commonly include safety guarding to standards like BS EN 14120:2015, with interlocked doors and limit switches.
- Mobility
- Many units are mobile on castors, allowing for repositioning for maintenance or to serve multiple discharge points.
- Control panel
- Often fitted with an IP65 rated control panel, positioned for safe and convenient operation and maintenance access.
Frequently Asked Questions
- Recycling tippers are often designed to suit specific bin types, such as Eurobins or custom containers. Buyers should confirm compatibility with their existing bins.
Machinery Masters Intelligence. General guidance for this category of equipment only, not a substitute for the seller's exact specifications. Always confirm details with the seller.