Transfer Pump Type SRU5/116/LS

Applications & Use Cases

• Moving water or low-viscosity liquids in industrial processes.
• Transferring process water, coolants, or cleaning solutions.
• Filling or emptying tanks and reservoirs in manufacturing facilities.
• Circulating liquids in closed-loop systems.
• General utility pumping in factories and workshops.

Typical Specifications

Typical flow rates

For this class of industrial transfer pump, flow rates commonly range from 5 to 50 cubic metres per hour, depending on the specific impeller and motor configuration.

Typical head pressure

Units of this type typically offer discharge pressures suitable for moving liquids over moderate distances or to elevated tanks, commonly up to 30-50 metres.

Power supply

Industrial transfer pumps are commonly powered by three-phase electricity, typically 400V, 50Hz, though single-phase options may exist for smaller models.

Motor power

Motor power for such pumps typically ranges from 2.2 kW to 11 kW, depending on the required flow and head.

Inlet/Outlet connections

Commonly found with flanged or threaded connections, typically ranging from 2 to 4 inches (DN50 to DN100) in diameter.

Construction materials

Wetted parts are typically constructed from stainless steel (e.g., 304 or 316) for corrosion resistance, with cast iron or stainless steel for the pump casing.

Frequently Asked Questions

• What types of liquids can this pump handle?

  This type of pump is primarily designed for water and low-viscosity, non-abrasive liquids. For aggressive chemicals or high-viscosity fluids, a different pump type would typically be required.

• Is this pump suitable for continuous operation?

• What maintenance is typically required for a used transfer pump?

• Can this pump handle solids?

• What installation considerations are important?